Lallemand Dry Yeast - Munich Wheat Beer
Quick start and vigorous fermentation, which can be completed in 4 days if kept above 63° F. Medium to high attenuation. Munich is a non-flocculent strain. In classic open fermentation vessels, the yeast can be skimmed off the top. Some settling can be promoted by cooling and use of fining agents and isinglass. Aroma is estery to both palate and nose with typical banana notes. Does not display malodours when properly handled. Munich yeast has found widespread use in the production of German Weizen and Hefeweizen. Best when used at traditional ale temperatures (62 - 72° F) and after re-hydration in the recommended manner:
Rehydration of Munich is recommended for use, and will reduce osmotic stress on the yeast when rehydrated and pitched in liquid form. Rehydration guidelines are quite simple, and present a much lower risk of contamination than a starter, which is unnecessary with dried active yeast. Sprinkle the yeast on the surface of 10 times its weight in clean, sterilized water at 30-35°C (86-95F). Do not use wort, or distilled or reverse osmosis water, as loss in viability will result. DO NOT STIR. Leave undisturbed for 15 minutes, then stir to suspend yeast completely, and leave it for 5 more minutes at 30-35°C. Then adjust temperature to that of the wort and inoculate without delay. Attemperate in steps at 5-minute intervals of 10°C to the temperature of the wort by mixing aliquots of wort. Do not allow attemperation to be carried out by natural heat loss. This will take too long and could result in loss of viability or vitality
